Vision Fitness X6100 User Manual

Page 2

Text mode
Original mode

STEP

To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find
your new Elliptical Trainer’s serial number located on the front axle tube, and enter here:

Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Elliptical Trainer.

If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12

NOTE:

It is recommended that you apply grease to the threads of each screw as you assemble your Elliptical Trainer to prevent

loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before
completely tightening any ONE screw.

A s s e m b l y

G u i d e

X6100

AND

X6000

FOLDING ELLIPTICAL TRAINERS

STEP