Getting connected, Connecting to an audio system (mixer, amp, etc.), Connecting to a tv or monitor – VocoPro CDG-1020PRO User Manual

Page 9

Connecting to an Audio System (Mixer, Amp, etc.)

What you will need:

• RCA cable (included)

• A Mixer and/or Amp with RCA Audio input

1. Using L/R RCA cables, connect the AUDIO OUT on the rear panel of the CDG-1020PRO deck to the AUDIO IN on a

mixer or amp.

Connecting to a TV or Monitor

What you will need:

• RCA cable (included)

• A TV and/or Monitor with RCA Video input

1. Using an RCA cable (yellow), connect the VIDEO OUT on the rear panel of the CDG-1020PRO deck to the VIDEO IN

on a TV or monitor.

NOTE: If your TV or monitor has only one video input, you may need a video switching device or a mixer with video

switching.

Getting Connected

��

��

CDG-1020PRO

Mixer

CDG-1020PRO