How to – Villaware NDVLCD0000 User Manual

Page 5

villaware.com

how To:

cont.

Prepare for use

SELECTING AND MEASURING

GROUND COFFEE

For best results, use a level tablespoon for

ground coffee measurement. make sure you

use medium grind coffee for a perfect brew.

Suggested Coffee Measurement Chart

To Brew

Ground Coffee

12 Cups

9 tbsp

10 Cups

7.5 tbsp

8 Cups

6.5 tbsp

6 Cups

4.5 tbsp

4 Cups

3 tbsp

1 level tablespoon (tbsp) = 5 gr/0.17 oz

1 cup = 5 fl oz of brewed coffee

Use more or less coffee to suit your taste.

note:

Pressing any button before setting the

clock will cause the clock to start keeping

time from 06:00 am. you must set the clock if

you want to use the DELAy BREW feature.

Adding Water and Ground Coffee

Open the brew basket lid. For your

convenience, you can lift out the

removable filter basket.

Place a 10-12 cup paper basket-style filter

into the removable filter basket.

note:

When using paper filters, it is

important that the sides of the filter fit flush

against the side of the filter basket. If filter

collapse occurs, dampen the filter before

placing in the filter basket and adding ground

coffee and water.

Add the desired amount of coffee and

gently shake to level the coffee. See the

“Suggested Coffee measurement Chart”.

Be sure the removable filter basket is

properly centered and all the way down in

the brew basket and close the lid.

Fill the decanter with cold, fresh water to

the desired capacity (1 cup equals 5

ounces). For easy and accurate filling, the

water markings on the glass decanter and

on the water window show the amount of

water needed to make the corresponding

desired number of cups. Do not fill past

the “12 cup mAx line” or water will flow

out of the overfill hole in the back of the

coffeemaker.

The amount of coffee brewed will always

be slightly less than the amount of water

poured in the water reservoir. This is due

to the minimum absorption of water by

the coffee grounds.

Lift the pour through reservoir lid and

pour the water into the water reservoir.

Close the lid and place the empty

decanter onto the warmer plate.

note:

make sure the decanter is fully placed

on the warming plate or the water and the

grounds will overflow from the filter basket.

An overflow may cause personal injury or

damage to property.

Caution:

To reduce the risk of damaging

the decanter and/or the risk of personal

injury, do not add cold water to the decanter

if the decanter is already hot. Allow the

decanter to cool before using.

Brew Coffee now

After completing the steps in the “Adding

Water and Coffee” section and with the

glass decanter and the filter basket

securely in place, turn the coffeemaker on

by pressing the SELECT/OFF

(e)

button

once. The BREW NOW green light will

turn on to signal that the coffeemaker is

on and brewing.

After the used coffee grounds have

cooled, carefully remove the filter basket

and discard them.

note:

The shower head cover is hot after

brewing. Always allow the coffeemaker to

cool down before cleaning.

Prior to making a second pot of coffee,

turn the Coffeemaker off. To turn the

Coffeemaker off, press the SELECT/OFF

button. The unit is off when all lights

(LEDs) are off.

make sure the decanter is empty before

starting to brew coffee.

Be sure to turn your coffeemaker off

when no longer using it.

note:

SCALDING MAY OCCUR IF THE

LID IS REMOVED DURING THE BREWING

CYCLES.

Brew Coffee later

you must first set the time for when you

would like the coffeemaker to begin

brewing your coffee as described in the

“Set the Clock” and “Set the Delay Brew

Time” sections.

Prepare your coffeemaker as described in

the “Adding Water and Ground Coffee”

section.

To activate DELAy BREW and program

your Coffeemaker to brew coffee at a

later time, press the SELECT/OFF

(e)

button until the amber LED next to DELAy

BREW is on. The coffeemaker is now set

to automatically brew coffee at the

pre-set later time.

At the pre-set time, the green BREW

NOW light will turn on and the DELAy

BREW amber light will turn off, indicating

the brewing has started.

The coffeemaker warming plate will keep

your coffee hot for 2 hours and then

automatically turn off.

note:

As a safety feature, your coffeemaker

will NOT start again automatically the next

day. If you want your coffee to brew at the

same time the following day, simply add a

new filter, coffee and water, and set DELAy

BREW by repeating Step 3 above.

To cancel DELAY BREW
Press the SELECT/OFF button until all lights

turn off.