VIPowER CD-ROM Box Enclosure VP-6048 - Manual (Page 5)

CD-ROM Box Enclosure Installation Guide 3
2-1.2 Assemble CD-ROM Box with CD-ROM Drive
1. Attach the two connectors from the end-panel assembly to the appropriate
connectors on the CD-ROM drive.
Retaining
Screws
(x4)
Rubber
Stands
(x4)
Drive Rails
Connectors/Fan
End-Panel
CD-ROM Box Enclosure Components
Retaining
Screws
(x4)
Top Cover
(Note alignment
flanges)
Bottom Cover
(Note cut-out
for flange)
Power and Data Connector Drive Connections
4-pin Power
Connector
40-pin IDE
Data Connector
CD-ROM
Drive
Pin-1 Colored
Stripe
End-Panel
Assembly
Vertical-Holder
Stand (Optional)