VIEWSONIC VS11287-1M - Manual (Page 14)

When the input source is TV mode, could select the Sound Setup, Picture
Setup, Child Lock Setup, Function Setup and TV Setup. Shown in the figure
below:
Sound Setup (Same in PC, TV, AV, S-Video and Components modes)
1. The range of volume, bass and treble is 0~100.
2. Select “ON” or “OFF” in sound selection to control the sound output.
3. The range of Balance is -50~+50. Adjusted from 0 to -50, the sound from
the right track fades until silent. Adjusted from 0 to +50, the sound from
the left track fades until silent.
4. AVL: you can set it to “ON” or “OFF”.
The function is adjusting the input sound automatically. You could enable
this function if you found the sound in the two tracks are big difference.
5. Select "ON" or "OFF" for Loudness: the setting is a default; you could
adjust it if necessary.
The menu below will appear when select continuously:
6. Audio mode: Designed for the different types of sound output, wherein,
the dialogue, music and theater modes are preset; you can set Bass,
Treble and Equalizer in sound output mode according to your preference.
7. Equalizer: You can select and adjust 100, 300, 1K, 3K and 8K
respectively.
8. Reset To Default: Reset the sound setting to the factory default value.
ViewSonic N2060w 12