Vivitar DVR 850W - Manual (Page 30)

29
4. The Exposure effect selected automatically appears on the LCD.
5. Press the OK button to confirm, save your choice and exit to the Setting
menu.
6. Press the DC button to revert back to the Photo capture mode to start
capturing photos with the new EV exposure setting selected.
Note:
After selecting your Exposure choice, the corresponding icon will appear on
the bottom of the LCD.
Selftimer
You can include yourself in a photo by using this feature to delay the time
between your pressing of the shutter button and when the photo is actually
taken. Place the camcorder on a tripod or on a flat and sturdy surface before
pressing the Shutter button.
There are 2 methods to activate the Selftimer.
Method 1:
1. In the DC camera mode, press the Left button.
2. The Selftimer icon on the top of the LCD will appear.
3. Press the Left button until you see the Selftimer option you wish to
use appear:
5 Seconds, 10 Seconds, Burst (continuous
snapshot)
4. Press the DC Shutter button.
5. The camcorder emits loud beeps until the photo is captured.
6. After the selected time delay the photo will be taken.
Method 2:
1. Press the Right/Left/Up/Down button to select the Selftimer menu