B. url commands of the network camera, Get server parameter values – Vivotek IP7131 User Manual
Page 52
- 51 -
www.vivotek.com
Restoring the factory defaults
will erase any previous settings.
Reset or restore the system after
power on.
1. Press on the button continuously.
2. Wait for self-diagnostic to run twice.
3. Free the button as soon as the second self-diagnostic starts.
B. URL commands of the Network Camera
For some customers who already have their own web site or web control application,
the Network Camera can be easily integrated through convenient URLs. This section
lists the commands in URL format corresponding to the basic functions of the erase
Network Camera.
Get server parameter values
Note: This request require administrator access
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/getparam.cgi?[
[&
where the
do not specify the any parameters, all the parameters on the server will be returned. If
you specify only
When query parameter values, the current parameter value are returned.
51 - User's Manual
VIVOTEK - A Leading Provider of Multimedia Communication Solutions