Vialta Beamer TV User Manual
Beamer tv (bm-tv) user’s guide
Table of contents
Document Outline
- title - Beamer TV (BM-TV) User’s Guide
- TOCtitle - Table of Contents
- heading 1 - Important Safety Precautions
- heading 1 - Introduction
- heading 1 - What’s Included with your Beamer TV
- heading 1 - Installing your Beamer TV
- heading 2 - Installing your Beamer TV with a Single-Line Phone
- numbered1 - 1) Place your Beamer TV on top of your television.
- numbered - 2) Connect one end of a supplied telephone cord to your nearest telephone wall jack an...
- numbered - 3) Connect one end of a supplied telephone cord to your phone and the other end to the...
- numbered - 4) Plug one end of the enclosed video cable into the VIDEO OUT jack on the back of Bea...
- numbered - 5) Set your television to use the correct video source.
- numbered - 6) Plug the AC power adapter’s pin into the POWER IN jack on the back of your Beamer TV.
- numbered - 7) Plug the power cord into a wall socket.
- heading 2 - Installing your Beamer TV with a Two-Line Phone
- heading 3 - Two-Line Phone with a Single Wall Jack
- numbered1 - 1) Place your Beamer TV on top of your television.
- numbered - 2) Connect one end of a supplied telephone cord to your nearest telephone wall jack an...
- numbered - 3) Connect one end of a supplied phone cord to the L1 or L1/L2 jack of your two-line p...
- numbered - 4) Plug one end of the enclosed video cable into the VIDEO OUT jack on the back of Bea...
- numbered - 5) Set your television to the correct video input source.
- numbered - 6) Plug the AC power adapter’s pin into the POWER IN jack on the back of your Beamer TV.
- numbered - 7) Plug the power cord into a wall socket.
- heading 3 - Two-Line Phone with a Double Wall Jack
- numbered1 - 1) Place your Beamer TV on top of your television.
- numbered - 2) Connect one end of a supplied telephone cord to your nearest telephone wall jack an...
- numbered - 3) Connect one end of a supplied phone cord to the L1 or L1/L2 jack of your two-line p...
- numbered - 4) Plug the one end of the enclosed video cable into the VIDEO OUT jack on the back of...
- numbered - 5) Set your television to the correct video input source.
- numbered - 6) Plug the AC power adapter’s pin into the POWER IN jack on the back of your Beamer TV.
- numbered - 7) Plug the power cord into a wall socket.
- heading 1 - Preparing Beamer TV’s Remote Control
- heading 1 - Adjusting the Camera Angle
- heading 1 - Placing a Video Call with your Beamer TV
- numbered1 - 1) Use the phone connected to your Beamer TV to place the call. (Audio will only come...
- numbered - 2) Turn television on and set to correct video source.
- numbered - 3) When the other party answers and you are ready to start the video call, press the S...
- numbered - 4) To send a video image, the receiving party must press their START/VIEWS button. The...
- numbered - 5) To end your video call, simply hang up the phone.
- numbered1 - 1) Use the phone connected to your Beamer TV to place the call. (Audio will only come...
- heading 1 - Receiving a Video Call with your Beamer TV
- heading 1 - Locating your Beamer TV’s Features
- heading 1 - Using your Beamer TV’s Features
- heading 1 - Tips
- heading 1 - Call Waiting and Three-Way Calling
- heading 1 - Compatibility
- heading 1 - Care and Maintenance
- heading 1 - Troubleshooting Guide
- heading 1 - Specifications
- heading 1 - Service
- heading center - Limited Warranty Vialta Beamer TV (BM-TV)