Vivitar T327 - Manual (Page 5)

4
Initial Camera Setup
Installing the Battery Installing the Memory Card
To Charge the Battery:
 Insert the battery as shown above.
Make sure the polarity is correct.
 Power off the camera.
 Connect the camera with the USB cable
either to the AC charger or to the
computer.
 Charge light will turn off when battery is
fully charged.
Turning On the Camera Using the Camera
 SD Memory card
(up to 32GB)
needed for normal use.
 Insert as shown above
until a click is heard.
Selecting
the modes
Accessing
the menu
+ -