VIEWSONIC ND5000 - Manual (Page 14)

ViewSonic ND4200/ND5000 10
Put Batteries in Remote Control
Remove the back cover from the remote control as shown below. Put two AA
batteries in the remote control. Be sure to match the positive end of the battery with
the positive end of the compartment. Put the cover back on the remote control.
4. Login
Open an Internet Browser, i.e., Internet Explorer. In the URL address field,
type in the default IP address of the ND4200/ND5000 (192.168.12.100) >
press Enter. A prompt appears asking for a User Name and Password. The
default name admin and the password admin automatically appear in the
corresponding fields > click OK. The Network Configuration screen appears
as shown on the next page. Note: The Network Display logs you out after
five minutes of inactivity.
For security purposes, we recommend that you change the default IP address,
Login and Password. For more information, see the Security section in this
user guide.
After logging in successfully, the Network Configuration screen appears as
shown on the next page. Note: The ND4200/ND5000 automatically logs
you out after fives minutes of inactivity.
For information on how to change network settings on an OS other than
Windows, please consult the OS user guide or your Network Administrator.