Victory Refrigeration VBC-480 - Manual (Page 2)

Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include
standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.
Continuous product development may necessitate specification changes and design without notice.
Victory Refrigeration, Inc. Remote Roll-In Blast Chiller
CHARACTERISTICS VBC-480 VBC-660
Capacity (lbs./90 mins.) 480 lbs 660 lbs
Width, Overall 57.95” 57.95”
Depth, Overall 92.7” 92.7”
Depth, Door Open 90º 120.25” 120.25”
Height with Floor 101.7” 101.7”
Height without Floor 98.2” 98.2”
Clear Door Width 27.5” 27.5”
Clear Door Height 73.8” 73.8”
No. of Carts (Optional) 2 2
Cabinet Voltage 208-230/60/3 208-230/60/3
Feed Wires (with Ground) 3 3
Total Amperes 20 20
Note: The self-contained refrigeration system is top mounted for the storage cycle only. This avoids short cycling of the stand
alone condensing unit when in the +38°F storage mode. All roll-in models require remote refrigeration.
Crated Dimensions and Weights
Height Width Depth Weight
VBC-480 72” 90.5” 59” 1158 lbs †
VBC-660 72” 90.5” 59” 1158 lbs †
†Shipped on 2 skids, each of this weight. Add 110 lbs per roll-in rack ordered.
Storage Refrigeration Data
Refrigerant Compressor BTUH*
VBC-480 R-134a .75 H.P. 4759
VBC-660 R-134a .75 H.P. 4759
*BTUH @ 100 o F. Ambient, +25 o F. Evaporator
Remote Blast Chilling Refrigeration Data
Refrigerant Liquid Line Suction Line BTU/H*
Size Size
VBC-480 R-404A .5 (X2) 1.125 (X2) 60,000
VBC-660 R-404A .5 (X2) 1.125 (X2) 72,000
*BTUH @ 90 o F. Ambient, +5 o F. Evaporator
Dimensional tolerance ± .25” Metric dimensions (mm)
Top View
Front View Without Insulated Floor
Copyright June 2009
Printed in U.S.A. 063009
NOTE: If cabinet is located
directly against wall an all around
clearance of 2” is required, and a
minimum clearance of 10” under
ceiling.
Insulated floor adds 3.5” in
height.
We reserve the right to change
specifications and product
design without notice. Such
revisions do not entitle the
buyer to corresponding
changes, improvements,
additions or replacements for
previously purchased
equipment.