Vision Fitness R2600HRC - Manual (Page 2)

To avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order. Before proceeding though,
enter your new Fitness Cycle’s serial number here:
Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Fitness Cycle.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your Fitness Cycle, to prevent
loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt.
Before you begin…
semi-recumbent fitness cycle
R 2 6 0 0 H R C
5
STEP
1
STEP
3
STEP
2
STEP
4
STEP
6
STEP