Unified Brands TAKU Premier Ventilation - Manual (Page 8)

Installation Instructions
Side Skirts
Figure 5
10' - 0" MINIMUM
GREASE
TERMINATOR
FRESH AIR SUPPLY
FAN CONTINUED
OR
GREASE TROUGH
EXHAUST
DUCT IS
FLUID
WELDED
TO
COLLAR
PIECES PROVIDED
One or two optional side skirts may be provided.
HING 40" MINIMUM
EXHAUST DUCTALL WELD
CONSTRUCTION
CEILING
(See Fig. 6)
1. Side skirts are offset at the top and have a 90° bend inward at the rear.
2. Skirts are to overlap the outside of the hood. Bolts and acorn nuts should be attached
per the drawing (stainless bolts and acorn nuts supplied).
3. Skirt flange should be screwed to the wall (screws not provided).
Figure 6
SUPPLIED STAINLESS BOLTS
AND ACORN NUTS
8 888-994-7636