Univex Aquastop 800 series - Manual (Page 24)

24
LCD Menu Options and Special Features
Quick overview
The individual settings may be adjusted
to your requirements.
Below is a quick overview of the
adjustable settings.
The steps for changing the settings are
described in detail below.
Select a cycle with the cycle selector
Press the Menu button (following selections appear in sequence)
Spin speed Program
finish at
time**
Washing
Mode
Reduced
Ironing
PreĆSoak Signal Child lock Set clock
Depends on
cycle and
model
(see Page 22).
Adjustable
in 30 minute
steps
Normal
Quick
OFF
ON
OFF
ON
OFF
Continuous
Max
OFF
ON
Hours/
minutes
allows
reduction of the
maximum spin
speed achieved
by the cycle
See note on
No final spin"
below*
allows the
cycle finish
time to be set
** Available
only if clock is
set (see page
18)
quick mode
for lighter
soiled items
and a shorter
wash time
a gentle spin
speed with
subsequent
fluffing to
reduce
creasing
an integrated
pre-soak
cycle for pre-
treatment of
heavily
stained items
the acoustic
signal
indicates the
start or end of
the cycle,
operating
errors, or
malfunction
allows the washer
to be secured to
prevent certain
functions from
being changed
inadvertently
clock must be
set before the
cycle option
finish at"
time can be
used
*No final spin (---")
The water is drained from the machine after the final rinse.
Press Select button until desired setting is obtained *No final spin (---")
The water is drained from the machine after the final rinse. The water is drained from the machine after the final rinse.
Recommended for delicate laundry. Use this setting to avoid Recommended for delicate laundry. Use this setting to avoid
creasing if the clothing cannot be taken out of the washing
machine immediately upon completion of the cycle.
Press Menu button for more settings
or press Start/Pause button to begin washing
Changing Displayed Settings
Before setting additional options,
choose a cycle with the cycle
selector.
Select settings by pressing the Menu
button and change them by pressing
the Select button.
Select the option to be changed with
the Menu" button. Press the button to
move to the next option on the display.
The active symbol starts flashing.
The current active option setting is
displayed on the right.
These settings can now be changed
with the Select" button. Press the
button to jump to the next possible
setting.
Pressing the Menu" button again,
saves the previous settings.
If no button is pressed for 10
seconds the settings are saved
automatically.
Signal Volume
The acoustic signal volume is
user-adjustable. Continuous" setting
allows the signal volume to be gradually
increased by pressing and holding the
Select button in during Signal setup.
When the volume is at its maximum
level, the display switches from
Continuous" to Max. Select the
Signal by pressing the Menu button to
cycle through the menu options.
Display Symbols
Symbol Function Settings
Washing
Normal
Wash
Washing
Mode Quick
Wash
X Stain
Removal
On/Off
o PreĆSoak On/Off
Z
Signal
Off,
Continuous,
Max
Child lock On/Off
Symbols are only displayed in the LCD
panel if the respective setting is not
Off".