Uniden Elite 8805 - Manual (Page 5)

For ELITE8815/ELITE8815+1
For Main Base Models ELITE8855/ELITE8855+1
1
2
1
2
Press and hold the Registration
button at the underside of the base.
Keep pressing the Registration
button until the handset charge
LED on main base starts to blink.
On the handset, press and hold the
key until you hear a beep.
With the main base in standby mode (i.e. not being used), press
on the base.
Use the up/down key to select .
Use the up/down key to select .
The base LCD screen will display the following prompt:
On the handset, press and hold the key until you hear a beep.
3
1
2
3
4
5
#
#
menu/select
System Setup
Register Handset
On handset, press and hold "#" key for 2 sec
De-register the handset
Press and hold and for more than 5 seconds. Select
.
The phone will ask you to confirm the deregistration. Select .
Select at instruction 1 if handset has previously
been registered to another base and you want to register to a new
base.
end #
Deregister Hs
Yes
Replacing Base
(4)
Registration button