Uniden FP203 - Manual (Page 4)

Batteries may be used instead of the supplied AC Adaptor.
1. Remove the battery compartment cover.
2. Fit 4 x AA alkaline batteries.
3. Replace the cover and secure with screw.
4x AA Batteries
Connecting Line Cords and AC Adaptor
1. Plug one end of the supplied telephone cord into the telephone line socket located
at the rear of the phone.
2. Plug the other end into the telephone line wall jack.
3. Plug the AC Adaptor lead into the power socket at the rear of the phone.
4. Plug AC Adaptor into a standard wall outlet and switch it on.
Setting Time and Date
If you subscribe to a Caller ID Service, your time and date will automatically be set for you
when you receive your first call to this unit.
1. Press and hold
, display shows "Set Time".
2. Use and to select the correct number, press to confirm and move
to the next digit, HH:MM DD/MM.
3. Press
to exit.
FLASH
DIAL
DEL
If using the AC Adaptor,
Batteries are not
required for normal
operation.
Battery
Compartment
Push in to
remove cover
Push in to
remove cover
OPTIONALBACKUPBATTERY INSTALLATION