Uniden FP100 - Manual (Page 17)

TROUBLESHOOTING
Problem
Can’t make or receive calls.
Can’t hear the telephone ringing.
One Touch Speed Dial Numbers are not
working correctly.
Handset does not hang up in the wall mount
Position.
Suggestion
• Make sure you use only the telephone line cord
supplied with this telephone.
• Check that both ends of the telephone
line cord and Handset cord are plugged in.
• Adjust the Ringer Volume to either
med/high.
• Make sure you do not have too many
telephones connected to the telephone line.
• Plug another telephone into the telephone
socket and check for a dial tone.
• Repeat the memory storage procedures detailed
on page 13.
• Each memory location can store a maximum of
16 digits. Number greater than 16 digits will not
be stored
• Make sure the Handset Retainer Tab has been
turned around (point facing up) and the
Handset is placed firmly into the cradle.
17
If your Telephone is not performing to your expectations, please try these simple
steps. If you are still unable to resolve the problems, contact Uniden Customer
Service for assistance. TROUBLESHOOTING
New Zealand: 0800 4 UNIDEN
4 864336
Australia: 1800 632 789
FP100-OM.qxd 7/12/98 08:57 Page 17