Uniden BC60XLT - Manual (Page 14)

4. Recheck frequency.
The frequency appears
one digit at a time in
sequence.
Repeat these steps to program each channel.
You can program the same frequency into two or more
channels, if desired.
Channels with no frequency programmed are skipped during
scanning.
After programming your scanner, record the frequencies in the
table below (or another convenient place) so you can easily
reprogram the scanner in case the memory is accidentally
erased. Use pencil so you can change your entries at a later
date.
Channel Frequency Notes
1
2
3
4
5
6
7
8
9
10
11
H:...Bc60xlt.vp
Mon Aug 30 15:34:03 1999
Color profile: Disabled
Composite Default screen