Compatible bases, Installing the accessory handset – Uniden DECT 6035 User Manual

Page 3

Compatible Bases

This handset is compatible with Uniden’s 1.8GHz DECT 6015

and DECT 6035 expandable phone series.

Installing the Accessory Handset

Checking the Package Contents

Make sure your package contains the following items. If any

items are missing or damaged, contact our Customer Service

Hotline. See inside the back cover page for contact information.

• Cordless Handset

• Belt Clip

• Charger

• Printed Material

• AC Adapter (model # AAD-600S: Input 240V AC, 50 Hz;

Output 9V DC, 210 mA)

• Rechargeable NiMH Battery Pack (model # BT-652: Capacity

650 mAh, 2.4V)

Installing the Battery

Follow the steps below to install the

rechargeable battery pack.

Using the fi nger indentation, press in on

the battery case cover and slide it down

to remove it.
Plug the battery connector into the

battery compartment jack. Be sure to

match the red and black wires to the

label near the jack.
Gently pull on the battery wires. If the

battery connector comes loose, try

connecting it again.
Replace the battery case cover and

slide it up until it clicks into place.

Note: Use only the Uniden BT-652

rechargeable battery pack supplied

with your cordless telephone.

DECT6005 OM.indd 2

20/8/07 1:49:20 PM