Terminix ALLCLEAR AllClear Mosquito Mister - Manual

9
POSITIONING THE MISTER
Proper placement of the A LL C LEAR
Cordless Mosquito Mister PRO is
important for optimal insect control.
1. Determine area to be protected.
2. Roll Mister into desired coverage
area and establish direction of
prevailing wind.
3. Position Mister according to
wind conditions shown here.
EXAMPLE:
Treating a Patio Area. Determine
prevailing wind. Depending on
wind direction, place Mister on
either side of, in the center of, or
a few feet beyond center of patio
so that prevailing winds will carry
mist solution directly over patio and
surrounding areas.
IMPORTANT TIPS
• Mister performs best if positioned
and activated near desired
coverage area.
• For optimal control, users may
need to mist an area more than
once and/or move the Mister to
another part of the treatment area
in the following situations:
• Areas of very heavy
mosquito populations
• Areas planned for large
gatherings (more people
bring increased mosquito
activity)
• Areas where wind is idle
since solution may not
be carried as far into
treatment area
• Place Mister and direct Mister
nozzles away from bodies of water
and eating or cooking areas when
food is present.
• Leave at least 2 to 3 feet between
Mister and barrier such as a
fence, house, or wall.
Position Mister at edge
of desired coverage
area with Mister nozzles
facing mist area so that
prevailing wind will carry
mist solution over target
area.
Position Mister in the
center of desired coverage
area so that the wind will
carry the mist solution
equally throughout
desired coverage area.
Position Mister in
the center of desired
coverage area or a few
feet beyond center of
coverage area.