Unigreen Master UMP 40 User Manual
Ump - master, Use and maintenance manual
This manual is related to the following products:
Table of contents
Document Outline
- Summary
- 1 USING AND KEEPING THE USE AND MAINTENANCE MANUAL
- 1.1 COMPOSITION OF THE MANUAL
- 1.2 GUARANTEE
- 1.3 PRODUCT RESPONSIBILITY
- 1.4 WARNING SIGNS IN THE MANUAL AND ON THE MACHINE
- 2 SAFETY REGULATIONS AND RESIDUAL RISKS
- 2.1 INTENDED USE
- 2.2 PROHIBITED USE
- 2.3 USING CHEMICAL PRODUCTS
- 2.3.1 REGULATIONS FOR THE USE OF CHEMICAL PRODUCTS
- 2.4 RECOMMENDATIONS
- 2.4.1 TAKING PRECAUTIONS AGAINST FIRE HAZARDS
- 2.5 MACHINES DESIGNED TO BE USED ONLY WITH CLEAN WATER
- 2.7 WEATHER CONDITIONS
- 2.8 ROAD CIRCULATION
- 3 CHARACTERISTICS AND SPECIFICATIONS
- 3.1 MACHINE IDENTIFICATION
- 3.2 TABLES OF FITTINGS ALLOWED
- 3.3 NOISE LEVEL OF THE MACHINE
- 3.3 STANDARDS OF REFERENCE:
- 4 USER'S INSTRUCTIONS
- 4.1 TRANSPORTING AND MOVING THE MACHINE
- 4.2 DESCRIPTION OF THE MACHINE
- 4.2.1 HAND WASHING TANKS
- 4.3 PRELIMINARY CHECKS
- 4.4 APPLICATIONS
- 4.5 MOTORS
- 4.5.1 ELECTRIC MOTORS
- 4.5.2 INTERNAL COMBUSTION ENGINES (TWO STROKE-PETROL-DIESEL)
- 4.6 PUMP
- 4.7 SUCTION FILTER
- 4.8 PRESSURE REGULATOR
- 4.8.1 COMPONENTS OF THE PRESSURE REGULATOR
- 4.8.2 GENERAL INSTRUCTIONS
- 4.9 DELIVERY FILTERS (only equipped models)
- 4.10 FILLING THE TANK
- 4.10.1 FILLING WITH THE ANTIPOLLUTION EJECTOR (Fig. 6)
- 4.11 test treatment with clean water
- 4.12 MIXING
- 4.12.1 MANUAL PREMIXING
- 4.12.2 PREMIXER ON COVER (OPTIONAL):
- 4.13 WASHING THE SPRAYER
- 5 HAND LANCES
- 6 HOSE REEL
- 8 MAINTENANCE
- 8.1 PROGRAMMED MAINTENANCE
- 8.2 EMPTYING TANK
- 8.3 ROUTINE MAINTENANCE
- 8.4 EXTRAORDINARY MAINTENANCE
- 8.5 REPAIRS
- 8.6 STORAGE IN A WAREHOUSE AND TRANSPORTATION
- 8.7 PUTTING BACK INTO SERVICE AFTER WINTER LAYUP
- 8.7.1 MATERIALS FOR DEMOLITION
- 8.7.2 INDICATIONS FOR A SUITABLE TREATMENT OF WASTE
- 8.7.3 ELECTRICAL AND ELECTRONIC APPARATUS WASTE (EEAW)
- FIG. 9 CIRCUIT DIAGRAM
- TABLE 4-5 tABLES OF DELIVERY OF NOZZLES FOR HAND LANCES
- TABLE 8 PROBLEMS, CAUSES AND SOLUTIONS
- TABLE 7 TABLE OF PROGRAMMED MAINTENANCE
- TAB.10 ALLOWED FITTINGS