First time log on – UTStarcom UT-300R2 User Manual
Page 18
Chapter 3 Before Configuring UT-300R2
15
First Time Log on
After inputting the forgoing IP address on URL address bar, a
new window appears prompting you for a user name and
password needed to gain access the web configuration
manager.
Figure 6
Log On Interface
Use the default system user name:
admin
and password:
admin
for first time set up. You can change the password once
you have established the ADSL connection. The user name and
password allows any computer on the same subnet as the UT-
300R2 to access the web configuration manger. This password
can also be used to Telnet to the device through the Ethernet or
the Internet interfaces.