Onnect, Ower, Harge – Univex SupraPlus Wireless Headset System User Manual
Page 6: Eadset
6
Plantronics SupraPlus W
ireless
Setup Guide
C
ONNECT
P
OWER
AND
C
HARGE
H
EADSET
3
STE
P
Insert into
YELLOW
labeled power
connection on Headset Base as
shown to charge.
Headset Base
(bottom view)
Base
Power
Adapter
1
. Plug the Base Power Adapter into a wall outlet, then plug the power cord into the
YELLOW
labeled connector on the bottom of the Headset Base. The
RED
Power light on the left
front of the Headset Base will turn on. (See illustration on page 13.)
A. Connect Headset Base to power outlet
1
. Slide the earpiece with microphone into the charging cradle as shown below.
2. Gently press down on the earpiece until fully seated into the cradle. The
AMBER
Charge
Status light on the base will fl ash to indicate the headset battery is charging. (See
illustration on page 13.) A solid light indicates full charge. A full charge will take
approximately 3 hours.
B. Charge the Headset for at least 20 Minutes before using
2
1