beautypg.com

Setting the number of rings, Setting the record time (or announce only), Setting.the.number.of.rings – Uniden TRU9488 User Manual

Page 54: Setting.the.record.time.(or.announce.only)

background image

53

Setting.the.Number.of.Rings

The.ring.time.setting.allows.you.to.set.the.number.of.rings.the.caller.hears.before.your.answering.machine.plays.the.

outgoing.message..You.can.set.the.ring.time.to.answer.after.two,.four,.or.six.rings..If.you.enable.the.Toll.Saver.(TS.

setting),.the.answering.machine.picks.up.after.two.rings.if.you.have.new.messages,.and.after.four.rings.if.there.are.

none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.after.the.second.ring.to.

avoid.long.distance.billing.charges.
From.the.base.or.handset:

Press.the.

MENU.soft.key..Select.the.ANSW..SETUP.menu,.and.then.the.RING.TIME.submenu.

Move.the.cursor.to.select.a.Ring.Time.(2.TIMES,.4.TIMES,.6.TIMES.or.TOLL.SAVER).
Press.the.

OK soft key. You will hear a confirmation tone.

Setting.the.Record.Time.(or.Announce.Only)

You.can.choose.how.long.callers.have.to.record.a.message..Set.the.record.time.to..MINUTE.or.4.MINUTES.to.limit.

the.record.time.for.incoming.messages..If.you.set.the.record.time.to.ANNOUNCE.ONLY,.the.answering.machine.an-

swers.the.call.but.prevents.callers.from.leaving.a.message..
From.the.base.or.handset:

Press.the.

MENU.soft.key..Select.the.ANSW..SETUP.menu,.and.then.the.RECORD.TIME.submenu.

Move.the.cursor.to.select.Record.Time.(.MINUTE,.4.MINUTES,.or.ANNOUNCE.ONLY).
Press.the.

OK soft key. You will hear a confirmation tone.

While.your.answering.system.is.set.to.ANNOUNCE.ONLY,.the.base.screen.will.display.ANNOUNCE.ONLY..If.you.

are.using.the.prerecorded.greeting,.the.answering.machine.automatically.switches.to.the.following.message:."Hello,.

no.one.is.available.to.take.your.call..Please.call.again.".If.you.are.using.a.personal.greeting,.the.answering.machine.

continues.to.use.that.greeting.

)
2)
3)

)
2)
3)