Unitech PA966 User Manual
Page 22
18
PA966/967 User's Manual
Now the laser will scan every three seconds. Aim the laser at the
target bar codes and each read bar code will appear on your PA966’s
screen (Data Only mode shown to the right).
Auto-Scan
In the same menu select Start Auto-Scan.
In the pop-up menu (shown to the right) select the time interval you want
between scans. Example shown is 3 seconds. Click Start.
Show Data Only
Select his function if you simply want the scanned data to appear on
the screen, one scan after another.
Select Show Data Only.
1D Scanning
The PA966 can be equipped with either a 1D laser bar code scanner
or a 2D imager. Following are the procedures for 1D scanning. For
2D scanning, refer to page
22
.
Select the Test tab near the top of the screen. Tap Menu at the
bottom of the screen and a list of options will appear.