Uniden DSS7805 - Manual (Page 5)

(4)
Using Your Expansion Handset
Battery Information
Cleaning the battery charging contacts
Now the your new handset is registered, it can perform all the same
functions as the handsets originally included with your phone. With your new
handset, you can
• Transfer calls between handsets
• Use two handsets as walkie-talkies in DirectLink mode
• Use two handsets as a baby/room monitor
• Hold 3- or 4- conference calls (depending on model)
• Access your main base's integrated answering device (if available)
See the owner's manual that came with your main base unit for complete
instructions on operating your new expanded digital phone.
When the batteries are very low and need to be charged, the phone is
programmed to eliminate functions in order to save power.
The batteries need to be charged when:
- The empty battery icon appears.
- Low Battery appears in the display.
If the phone is in standby mode, none of the keys will operate.
If you are on a call, complete your conversation as quickly as possible,
and return the handset to the charging cradle.
Do not use paint thinner, benzene, alcohol, or other chemical
products. Doing so may discolour the surface of the telephone and
damage the finish.
Low battery alert
To maintain a good charge, it is
important to clean the charging
contacts on the handset once a
month. Using water only, dampen a
cloth to clean the charging contacts.
Then make sure to go back over the
charging contacts with a dry cloth
before returning the handset to the charger to charge.
Caution: