Univex UDB275MP - Manual (Page 12)

12
English
UDB275MP
Basic Operations
Audio mode adjustments
1. Press the [A-M] button to select the Adjustment
mode. The mode switches as follows each time
the [A-M] button is pressed:
BASS TREB BAL FAD previous
display.
2. Turning the [ROTARY] knob to adjust the
selected Audio mode.
BASS (Bass) : Adjustment range : -7 to +7
TREB (Treble) : Adjustment range : -7 to +7
BAL (Balance) : Adjustment range : L12 to R12
FAD (Fader) : Adjustment range : F12 to R12
∗
The display returns to the previous mode 7
seconds after the adjustment.
Note:
Bass and Treble can only be adjusted when the
“Z-Enhancer” is off.
3. When the adjustment is complete, press the
[A-M] button several times until the Function
mode is reached.
Note:
Try to avoid pushing down the cover further after
flipping down.
2. Close the cover properly when not in use.
Note:
If you accidently push down the cover further after
flipping down, you can close the cover back and
push 2 sides of the cover to return to normal condi-
tion.
Adjusting the bass
1-1 Press the [A-M] button and select “BASS
0”.
2-1. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ The factory default setting is “BASS 0”.
Adjusting the treble
1-1. Press the [A-M] button and select “TREB
0”.
2-1. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ The factory default setting is “BASS 0”.
Adjusting the balance
1. Press the [A-M] button and select “BAL 0”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗ The factory default setting is “BAL 0”.