Uniden UH-090 - Manual (Page 12)

Recalling the Instant Channel
Momentarily press the key at any time to return to the Instant Channel.
INST
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Operation
Rotary
Channel
Selector
STORE CTCSS
FM/AM SCAN
DUAL OS/GS
MEM INST
INST SET DUP
FM SQ
FM
INST
S/RF VOL
SLCT
Select FM or AM by pressing . . Turn
the Rotary Channel Selector to select the
channel you prefer.
Press and hold for 2 seconds to store
the new setting (you may select one Instant
Channel for both FM and AM bands). INST icon
appears.
Programming the Instant Priority Channel
FM/AM
INST
Dual Band Watch
Select the first channel and band you wish to
receive.
Press and hold for 2 seconds. DUAL
icon appears.
FM/AM
The UH-090 will now
continuosly receive this
channel and
monitor, every 1.5 seconds, the
‘Instant’
Channel on the opposite band.
If a signal is received on this Instant Channel,
the UH090 will beep once and flash AM or FM
continuously until the signal stops.
STORE CTCSS
SCAN
DUAL OS/GS
MEM INST
INST SET DUP
FM SQ
FM
S/RF VOL
SLCT FM/AM
Rotary
Channel
Selector
If a button is not pressed within 10 seconds the
UH-090 will automatically exit Select Mode.
11
DUAL
NOTE
STORE CTCSS
FM/AM SCAN
DUAL OS/GS
MEM INST
INST SET DUP
FM SQ
FM VOX
CTCSS
S/RF VOL
SLCT
CTCSS (FM Only)
Select the desired channel to use CTCSS.
Press and hold for 2 seconds. CTCSS
icon appears.
Turn the Rotary Channel Selector to select the
desired CTCSS code. Press once
to store the new setting.
Channels 05 and 35 are Emergency Channels
and channel 11 is a calling channel. CTCSS
cannot be selected on these channels.
FM SQ
FM SQ
Rotary
Channel
Selector