Uniden XS 910 - Manual (Page 11)

The status light won’t
illuminatewhenthe handset
is placed on the base.
The audiosounds weak
and/ or scratchy.
Can’t makeor receive calls.
The handset doesn't ring or
receive a page.
If you still have a problem.
• Make sure the AC adaptor is plugged into the base and wall outlet
Make sure the handset is properly seated in the base.
Make sure the charging contacts on the handset and base are clean.
•
•
•
•
•
• Checkbothendsof the telephone line cordare pluggedin firmly.
• Makesurethe AC adaptor is pluggedinto the baseand wall outlet.
• Disconnect the AC adaptor for a few minutes, then reconnect it.
• Make sure that you are not too far fromthe base.
• Chargethe handset.
• The battery pack may beweak.Chargethe battery for 20-25hours.
• The handset may betoo far away fromthe baseunit.
• Place the baseunit away from appliances or metalobjects.
Australia: www.uniden.com.au New Zealand: www.uniden.co.nz
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
Move the handset and/or base to a different location away from
metal objects or appliances and try again.
Press while on a call to change the operating channel.
Make sure that you are not too far away from the base.
Page 7
channel