Ultimate Technology 2200 User Manual

Page 7

7. Remove the LCD, LCD VGA video cable and power supply from the LCD box. Connect the LCD

VGA (Video) cable to the Video Port (Blue) on the back of the PC.

8. Connect the power cable from the LCD power supply to the connector on the LCD Display.

Connect the AC cable to the LCD power supply and then to a wall outlet or the optional Power
Conditioner.

Figure 5:

Bottom View of LCD and Rear View of PC

9. Connect the USB connector end of the Barcode Scanner cable to a USB port on the back of the

PC. Connect the other end into the jack on the barcode scanner handle.

Figure 6:

Rear View of PC

11692012 Rev D

Page 7 of 12