Uniden DCX750 - Manual (Page 12)

11
Hold, Conference, Transfer, and Intercom
Muting the Ringer (One Call Only)
While the handset is ringing, press [ ] to mute the ringer for
this call. The phone will ring again on the next call. (The
handset must be off the cradle to mute the ringer.)
Put a call on
hold
Press [xfer/intercom]. If you leave a caller on hold for
more than five minutes, the call will be disconnected.
To return to the party on hold, press [ /flash] or [
].
Join an in-
progress call
To join a call already in progress, press [ /flash] or
[
]. You can hang up normally; the other station
remains connected to the call.
Transfer a call
Press [xfer/intercom]; the call is placed on hold. Use
[
] or [ ] to select the station you want to transfer
the call to, and press [select/ ]. (To page all
stations at once, select ALL.) When the other station
answers, you can talk to the station; the outside call
remains on hold. If the other station accepts the call,
you will be disconnected.
Cancel a
transfer
To cancel the transfer and return to the call, press
[ /flash] or [
].
Accept a
transferred
call
To answer the transfer page and speak to the
transferring station, press [ /flash] or [xfer/intercom].
To accept the call and speak to the caller, press
[ /flash] again.
Make an
intercom page
With the phone in standby, press [xfer/intercom].
Use [
] or [ ] to select the station you want to talk
with, then press [select/ ]. (If you select ALL, all
other stations will be paged.)
Cancel a page
To cancel the intercom page, press [ ].
Answer an
intercom page
Press [ /flash] or [xfer/intercom]. If AutoTalk is on,
the handset automatically answers the page when
you remove it from the cradle.