Uniden CXAI 5198 User Manual

Uniden Boating Accessories

Table of contents

Document Outline

Welcome
Features
Terminology
- Talk and Standby Times
Controls & Functions
Setting up the Phone
- A. Choose the best location
- B. Connect the base unit
- C. Install the rechargeable battery pack into the handset
- D. Connect the charger
- E. Mount the base unit on a wall (if desired)
  - Standard wall plate mounting
  - Direct wall mounting
Installing the Beltclip
- To attach the beltclip
- To remove the beltclip
Optional Headset Installation
Base Setup
- Adjusting the LCD Contrast
- Setting the Dial Mode
- Setting Day and Time
- Setting the Area Code
- Setting the Language of your Answering System and the Base Display
Handset Setup
- Using the interface
- Setting AutoTalk
  - Selecting a Language (Handset only)
  - Checking Area Code selected from the Handset
Using Your Phone
- Power Failure Operation
- Making and Receiving Calls
- Redialing the last dialed number
  - From the handset
  - From the base
- Hanging Up
Call Waiting
Placing a Call on Hold
Adjusting the Ringer, and Earpiece and Speaker Volume
- Selecting the Handset Ring Tone and Volume
- Setting the Base Ringer Volume
- Earpiece and Speaker Volume
Muting the Ringer
- Do Not Disturb (DND)
- Temporarily Muting the Ringer
Mute Base Microphone
Tone Dialing Switch-over
Traveling Out of Range
Selecting a Different Channel
Conferencing
- Joining a Conference Call
  - From the base
  - From the handset
Intercom
- Making an Intercom Page
  - From the handset
  - From the base
- Making an Intercom Page While the Line is on Hold
  - From the handset
  - From the base
- Answering an Intercom Page
  - From the handset
  - From the base
Using the Speed Dial Memory
- Storing Names and Numbers in Speed Dial Memory
- Storing Caller ID data in Speed Dial Memory
- Making Calls from Speed Dial Memory
  - To cancel speed dialing
Caller ID and Caller ID on Call Waiting (CIDCW)
- When the Telephone Rings
- Viewing the Caller ID Data
- Deleting Data from the Caller ID List
  - Deleting a Caller ID Data
  - Deleting all Caller ID names/numbers
- Making a Call from the Caller ID Data
The Integrated Answering Device
- Features
Setting Up the Answering Machine
- Setting the Record Time
- Setting the Call Screen
- Setting the Ring Time
- Setting the Message Alert On or Off
- Turning the message alert tone off by pressing any key
- Setting a Security Code (PIN Code)
Turning the Answering System On/Off
Setting Your Outgoing Message (Greeting)
- Record a Personal Outgoing Message
- Selecting Your Greeting
- Announce only feature
Using Your Answering System
- Playing your messages
- Repeating a message
- Skipping a message
- Deleting a message
- Voice memo
- Recording a conversation
- Screening a call
  - From the base
  - From the handset
Remote Operation
- Remote access with any touch-tone telephone
- Turn on the Answering System Remotely
- Remote Access with the Handset
Note on Power Sources
- Power Failure
- Low battery alert
- Battery replacement and handling
- Warning:
- Cleaning the battery charging contacts
General Information
- AC Adapter Information (For the base) (For the charging cradle)
- Battery Information
Troubleshooting
Liquid Damage
I.C. Notice
- TERMINAL EQUIPMENT
- RADIO EQUIPMENT
Index
Remote Operation Card
At Uniden, we'll take care of you!