Uniden DECT 2035 Series - Manual (Page 5)

4
Charging the Accessory Handset
The handset is powered by a rechargeable battery pack that
automatically recharges when the handset is placed in the
charging cradle.
Use only the Uniden AAD-600S(M) AC adapter with the charging
cradle.
What if the charge LED
doesn’t light up?
Reseat the handset; make sure
the contacts on the bottom of
the handset are lined up with
the contacts in the cradle.
Check the AC adapter connection.
Make sure you are not using an outlet
that’s controlled by a wall switch.
Connect the AC adapter to a
standard 240V AC wall outlet.
Connect the AC
adapter to the DC IN
9V jack as shown.
(It may already be
connected.)
Place the handset in the
charging cradle with the
display facing forward.
Charge your handset at least 15 to 20 hours
before using your new handset for the first time.
Make sure that the charge
LED illuminates when the
handset is seated.