Uniden 2465 - Manual (Page 61)

[ 55 ]
EXP
ANDING
YOUR PHONE
CONNECTING THE CHARGER
1) Connect the AC adapter into the charging
cradle and to a AC wall outlet.
2) Set the charger on a desk or tabletop, and
place the handset in the charger with the
keypad facing forward (see “Installing the
AA batteries” on page iii to install
the batteries.
Your phone supports up to 4 handsets (including the handset(s) supplied with your
phone). You can now place a fully featured cordless handset anywhere AC power is
available to connect the handset charger.
Effective combinations, for example:
- 4-way conferencing (the base, 2 handsets, and one outside line), while on an intercom
call using the other 2 handsets, or
- 4-way conferencing (3 handsets and an outside line)
EXPANDING YOUR PHONE
• To use the DSS2405,
register it to the
DSS2455 or DSS2465
series base.
• Save this manual for
detailed operation.
• All of the handsets
ring when a call
is received. IMPORTANT:
• If you purchase a DSS2405 extra handset, please register the handset to the
DSS2455 or DSS2465 series base before use. The DSS2405 will not operate until it
is registered.
• If you change a setting of the Global Setup and Answering Setup menu in one of
the handsets, you change settings for all the handsets. For all other features they
must be set separately through each handset.
UP308BH (DSS2465) ENG OM 8/6/03 10:37 AM Page 55