Unigreen Super Spalliera User Manual
Use and maintenance manual
Table of contents
Document Outline
- Summary
- 1 USING AND KEEPING THE USE AND MAINTENANCE MANUAL
- 1.1 COMPOSITION OF THE MANUAL
- 1.2 GUARANTEE
- 1.3 PRODUCT RESPONSIBILITY
- 1.4 WARNING SIGNS IN THE MANUAL AND ON THE MACHINE
- 2 SAFETY REGULATIONS AND RESIDUAL RISKS
- 2.1 INTENDED USE
- 2.2 PROHIBITED USE
- 2.3 USING CHEMICAL PRODUCTS
- 2.3.1 REGULATIONS FOR THE USE OF CHEMICAL PRODUCTS
- 2.4 RECOMMENDATIONS
- 2.4.1 TAKING PRECAUTIONS AGAINST FIRE HAZARDS
- 2.5 WEATHER CONDITIONS
- 2.6 MACHINES DESIGNED TO BE USED ONLY WITH CLEAN WATER
- 2.7 DRIVING ON THE ROAD
- 3 CHARACTERISTICS AND SPECIFICATIONS
- 3.1 TABLES OF FITTINGS ALLOWED
- 3.2 NOISE LEVEL OF THE MACHINE
- 3.3 STANDARDS OF REFERENCE:
- 4 INSTRUCTIONS
- 4.1 DESCRIPTION OF THE MACHINE
- 4.1.1 WORK STATIONS
- 4.1.2 HAND WASHING TANKS
- 4.2 PRELIMINARY CHECKS
- 4.3 TRANSPORTING AND MOVING THE MACHINE
- 4.3.1 TOWED ATOMISERS
- 4.4 TRACTOR COUPLING
- 4.4.1 THREE-POINT COUPLING
- 4.4.5 HyDRAULIC CONNECTION TO THE DISTRIBUTORS
- 4.5 CARDAN SHAFT
- 4.6 PUMP
- 4.7 SUCTION FILTER
- 4.8 PRESSURE REGULATOR
- 4.8.1 COMPONENTS OF THE PRESSURE REGULATOR
- 4.8.2 GENERAL INSTRUCTIONS
- 4.8.3 DELIVERY FILTERS (ONLY EQUIPPED MODELS)
- 4.9 AUXILIARIES TAPS BLOCK
- 4.10 FILLING THE TANK
- 4.11 TEST WITH CLEAN WATER
- 4.12 MIXING
- 4.12.1 MANUAL PREMIXING
- 4.12.2 PREMIXER ON COVER (OPTIONAL):
- 4.12.2 PREMIXER ON COVER (OPTIONAL):
- 4.12.4 COVER WASHER FOR CHEMICAL CONTAINERS
- 4.13 WASHING THE ATOMISER
- 4.13.1 CIRCUIT WASHER AND TANK WASHER
- 5 BLOWER GROUP
- 5.1 MULTIPLIER - FAN UNIT
- 5.5 CLUTCH
- 5.3 DISTRIBUTOR ACCESSORIES
- 5.3.1 ventagli (FANs) CANOPY, AND ESPALIER DISTRIBUTORS
- 5.3.2 MINIBAR for ESPALIER
- 5.3.2 SUPER spalliera for ESPALIER
- 5.3.3 RV BOOM FOR GDC
- 5.4 HYDRAULICS
- 5.4.1 OIL FEED FROM TRACTOR
- 6 SPRAYING
- 6.1 DESCRIPTION OF THE DIFFUSERS
- 6.1.1 NON-DRIP VALVE
- 6.2 DESCRIPTION OF THE MFC® NOZZLES
- 6.3 MIXTURE CONCENTRATION
- 5 MISTBLOWER CALIBRATION
- 6.4.1 BATCHING TAPS (see picture 20)
- 6.4.2 CALIBRATED PLATES CP
- 7 HAND LANCES
- 8 MAINTENANCE
- 8.1 PROGRAMMED MAINTENANCE
- 8.2 ROUTINE MAINTENANCE
- 8.2.1 CLEANING THE NOZZLES
- 8.2.2 LUBRICATION
- 8.2.3 MULTIPLIER LUBRICATION
- 8.3 EXTRAORDINARY MAINTENANCE
- 8.4 REPAIRS
- 8.5 STORAGE IN A WAREHOUSE AND TRANSPORTATION
- 8.6 PUTTING BACK INTO SERVICE AFTER WINTER LAYUP
- 8.7 DEMOLITION AND DISPOSAL
- 8.7.1 MATERIALS FOR DEMOLITION
- 8.7.2 INDICATIONS FOR A SUITABLE TREATMENT OF WASTE
- 8.7.3 ELECTRICAL AND ELECTRONIC APPARATUS WASTE (EEAW)
- TABLES FOR CALIBRATING AIRDROP 2 VENTAgli (FANS) vr.Canopy
- TABLES FOR CALIBRATING AIRDROP 2 VENT. (fans) espalier topdif.
- TABLES FOR CALIBRATING AIRDROP 2 VENTAGLI (fans) vr.espalier
- TABLES FOR CALIBRATING AIRDROP MINIBAR
- TABLES FOR CALIBRATING AIRDROP RV-GDC
- TABLES FOR CALIBRATING AIRDROP SUPER SPALLIERA
- TABLE 3 TABLES OF DELIVERY CaLIBRATED PLATE
- TABLE 4-5 TABLES OF DELIVERY OF NOZZLES FOR HAND LANCES
- TABLE 7 TABLE OF PROGRAMMED MAINTENANCE
- TAB.18a ALLOWED FITTINGS