Uniden DCX150 Series - Manual (Page 8)

7
Resetting the Handset Without the Base
If the original base this handset was registered to is not
available for some reason (for example, it is lost or somehow
incapacitated), you can still reset the handset and use it with
another base.
Press and hold END and #
for at least five seconds, until the
SYSTEM RESET menu appears.
Press
to move the cursor to Base Unavailable and then
press MENU/SELECT.
Press
to move the cursor to the base which you want
to de-register from, and then press MENU/SELECT. Base
Unavailable appears.
Press
to move the cursor to Yes, and then press
MENU/SELECT
. You hear a confirmation tone, and the
handset deletes its own link to the base without trying to
contact the base.
Now you are ready to register the handset to the new base.
)
)
3)
4)
Resetting the Handset
If you want to register the handset to a different base or replace
a handset with another one, you must first clear the registration
information from the base and the handset.
Press and hold END and #
for at least five seconds, until the
SYSTEM RESET menu appears.
Select the Deregister HS
submenu by pressing MENU/
SELECT. Which Handset?
appears in the display.
Use
or to select the
handset ID to be de-registered from the list, and then press
MENU/SELECT. Deregister HS appears.
Press
to move the cursor to Yes, and then press
MENU/SELECT
. You will hear a confirmation tone.
)
)
3)
4)
9JKEJ*CPFUGV!
*CPFUGV
*CPFUGV 9JKEJ*CPFUGV!
*CPFUGV
*CPFUGV
UU683BH(DCX150) OM_0807.indd 7 8/7/2008 11:37:56 AM