Universal Electronics Polaris User Manual

Universal Electronics Remote control

Table of contents

Document Outline

Polaris Remote Control
Control Remoto Polaris
Users Guide
Guía del Usuario
TABLE OF CONTENTS
Quick Start Guide
- Note:
Program Control of Your Television and Cable Box
- Note:
Operate Your Cable Box
- 1.
- 1.
Operate Your Television
- 1.
- Note:
Turn on Backlighting
- 1.
- 1.
Introduction
Features and Functions
- Key Charts
- Device Table
  - NOTE:
Installing Batteries
- 1. On the back of the remote control, push the tab and lift off the battery cover.
- 2. Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them. Align the cover’s keys with the case’s holes and press the cover back into place. The tab should click when the cover is locked.
- 3.
- NOTE:
Programming Device Control
- NOTE:
  - 1. Turn on a device.
- NOTE:
  - 2.
  - 3. Use the “Manufacturer’s Codes (Códigos del Fabricante)” starting on page 39) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the selected mode key blinks twice.
- NOTE:
  - 4.
  - 5. Repeat steps 1 through 4 for the other device you want the remote control to operate (either TV or CBL). For future reference, write down each working device code in the boxes on the following page.
Searching for Your Code
- 1. Turn on your TV.
- 2.
- 3.
- 4.
- 5.
- NOTE:
Checking the Codes
- 1.
- 2.
- 3.
- NOTE:
  - 4.
Programming ID Lock
- 1. Turn on the cable converter.
- 2.
- 3.
- 4. Perform the instructions under “Programming Device Control” on page 12 to program device control for the desired cable converter.
- 5.
- 6.
Locking the Volume to your Cable Box
- 1.
- 2.
Programming the VOD Key for Specific Channels
- 1.
- 2.
- 3.
- 4.
- NOTE:
  - 5.
  - 6. To add another channel, repeat steps 1 through 5, substituting the new channel to be added in step 4.
- NOTE:
- Clearing the VOD Key
  - 1.
  - 2.
  - 3.
  - 4.
Troubleshooting
- PROBLEM:
- SOLUTION:
- PROBLEM:
- SOLUTION:
- PROBLEM:
- SOLUTION:
- PROBLEM:
- SOLUTION:
FCC Notice
Additional Information
- Índice de Materias
- GUÍA RÁPIDA
  - Nota:
- Programación del Control de Su Televisor y Decodificador
  - Nota:
- Funcionamiento del Decodificador
  - 1.
  - 1.
- Funcionamiento del Televisor
  - 1.
  - Nota:
- Retroiluminación
  - 1.
  - 1.
- Introducción
- Características y Funciones
  - NOTA:
- Instalación de las Baterías
- Programación del Control del Aparato
- Búsqueda del Código
- Verificación de los Códigos
  - 1. b
  - 2.
  - 3.
  - NOTA:
    - 4.
Programación del Bloqueo del ID
- 1. Encienda el convertidor de cable.
- 2.
- 3.
- 4. Siga las instrucciones descritas en “Programación del Control del Aparato” en la página 30 para programar el decodificador deseado.
- 5.
- 6.
- Bloqueo del Volumen a Modo Decodificador
  - 1.
  - 2.
- Programación del Botón Vod para Canales Específicos
- Solución de Problemas
- Aviso de la FCC (Comisión Federal de las Comunicaciones)
- Información Adicional
Manufacturer’s Codes (Códigos del Fabricante)