Uniden NEO TRUC56 - Manual (Page 44)

E X PA N D I N G Y O U R P H O N E [ 42 ]
To transfer a call (to the second handset)
1) Press DEL/TRANS during a call. The call will automatically be
placed on hold and the transfer tone sounds.
2) When the other handset receives the call, the transfer tone
stops. To cancel the transfer, press DEL/TRANS or TALK/FLASH
on the handset.
To receive a transferred call (from the second handset)
Pick up a handset (when AutoTalk is set to On), or press
talk/flash to answer the transferred call. Additionally, you can
answer the transferred call by pressing any number key,
✱ / tone,
or # (when AutoTalk is set to On).
Call Transfer Feature
You can transfer an outside call to the other handset.
If you transfer the call and it is not picked up after 5 minutes,
the call will be disconnected.
Setting up
Charging
Charge the second handset for 15-20 hours before using.
Dialing mode
Dialing mode is a universal setting. When the mode is changed on the original handset,
the setting for the second handset is changed as well.
Second Handset Operation
TRUC56_OM 12/11/02 9:26 AM Page 42