Resetting the scanner, Troubleshooting – Uniden UBC93XLT User Manual

Page 49

Troubleshooting

Resetting the Scanner

If the scanner's display locks up or stops operating

properly, you might need to reset the scanner.
Caution: This procedure clears all the information

you have stored in the scanner. Before you reset the

scanner, try turning it off and on to see if it begins

working properly. Reset the scanner only when you

are sure it is not working properly.
1. Turn off the scanner.
2. While holding down

2, 9, and Hold, turn on the

scanner. It takes about 3 seconds to initialize

and

CLEAr appears.

UBC93XLT Paper OM.fm Page 49 Monday, May 14, 2007 9:01 AM

UBC93XLT OM.indd 49

23/9/11 1:58:53 PM