Uniden MHS135DSC - Manual (Page 31)

E-27 Uniden MHS135DSC Radio Owner’s Manual
Goto Menu
The Goto menu allows you to select from a list of saved coordinates or to input
coordinates manually.
To input coordinates
1. From the Goto Fav. screen, select [Manual].
2. Manually input coordinates. When the last digit is entered, the screen displays Go
and Save.
3. Select Go to display the coordinates and the compass bearing and begin traveling
towards that destination.
4. Select Save to save the location into a Favorites directory. When you select Save,
the screen prompts you to name these coordinates.
5. When you have entered a name for the saved coordinates, they will appear on
the Goto Fav. screen as a selection.
To select a Goto Favorite
1. From the Goto Fav. screen, select from the directory entries listed.
2. The screen displays three options: Go, Delete, and Edit.
3. Select Go to display the coordinates and the compass bearing and begin traveling
towards that destination.
Select Delete to delete the entry.
Select Edit to change the entry.
Add Menu
The Add menu allows you to save your current position to the Favorite directory.
GPS SETUP MenU
The GPS Setup menu has eight sub-menus.
x Unit Power. Turns power to the internal GPS module on and off.
x Sog Unit (Speed over Ground). Set the measurement for Speed over Ground in
Knot, Mil/h, and Km/h.
x GPS Module. Select the primary or secondary GPS module.
x NMEA Output. Allows you to select NMEA sentences to receive.
x Compass. You can decide whether you want to orient the compass screen with
North as up or your course direction as up.
x Unit Power. Turns power to the internal GPS module on and off.
x Power Save. Select the power level at which the GPS unit will enter Power Save
mode.
x Time Adjust. Adjust local time.
x Daylight Save. Adjust for Daylight Saving Time.
18
Goto Fav.
[Manual]
Uniden
Back
[MENU]
Exit
[CLR]
Select
[ENT]
A
USA
Favorite
Press
Goto