Uniden UBC73XLT - Manual (Page 41)

41
Special Features
2. Enter the frequency you want to start from by
using the number keys. (Press to enter a
decimal point).
3. Press Func + or Func + . The scanner
searches, starting from the frequency you
entered in Step 2.
If you enter a frequency that is out of range, the
scanner sounds an error tone and Error appears.
Press Func + to change the search direction
downward or Func + to change the search
direction upward. Frequencies appear during the
search.
Notes:
• You can set the delay function on or off during
the search or while the search stops.
• You can skip a frequency when the search stops.
After the search skip frequency is set, the scan-
ner starts direct search again.
Direct Entry Search Hold Mode
To stop searching during direct entry search, press
Hold. Hold appears. In this mode, pressing Func +
changes the search direction downward and
pressing Func + changes the search direction
upward. or appears depending on the search
direction.
Press
Func + to decrease the frequency by one
step or Func + to increase it by one step. Hold
down or for about 1 second to quickly
increase or decrease the frequency.
To resume direct search, press
Func + Src or Hold.
or appears on the display, showing the search
direction.
UBC73XLT Paper OM.fm Page 41 Monday, May 14, 2007 9:13 AM
UBC73XLT OM.indd 41 23/9/11 1:50:32 PM