USRobotics USR9600 User Manual

Page 10

I want to use the USB Phone for all of my computer sounds.

Possible Solution:

Your computer may not be using the USB Phone as

the primary voice device. Click Windows

Start,

Control Panel, and then Sounds and Audio
Devices. Click the Voice tab and then make sure
USB Audio Device is selected for both Voice play-
back and Voice recording. (This may be slightly dif-
ferent depending on your operating system.)

During a call, the sound is played through the speakers of my computer.

Possible Solution:

Double-click the

Skype software icon in the system tray by your clock on your computer desktop.

Click

Tools and then Options. Click Sound Devices and then make sure USB Audio Device is

selected for both

Audio In and Audio Out.

The USB Phone’s microphone does not work (the caller cannot hear me)
after resuming the computer from “Standby” or “Hibernate” mode.

Possible Solution:

Unplug the USB Phone from the port and plug it back in again.

If you experience any problems with your Skype software, refer to

http://support.skype.com

We are constantly striving to provide users with the most helpful information. For the most

updated configuration and troubleshooting information, visit the U.S. Robotics Web site at

http://www.usr.com/support