Uniden UH089sx - Manual (Page 10)

UNIDEN Model uh089sx UHF CB Radio
Operation
Group Scan (GS) Mode
Allows you to monitor a Priority (Instant) Channel
while scanning (Instant Priority channel see p. 11)
To use GS Mode Scanning, press . GS icon appears on the display.
GS Scanning checks the Instant Priority Channel for activity regularly.
To deactivate SCAN, press the button or the PTT button on the
microphone.
If the Priority Channel becomes
active the radio will stay on that
channel for as long as the signal is
present. If the received signal
ceases, Priority Scanning continues
after 3 seconds.
If scanning stops on a channel
which is not a Priority Channel,
uh089sx will continue monitoring
the Priority Channel for activity
while listening to the active one.
Select which Scanning Mode you
wish to use - OS or GS.
Select the channel you want to
store.
Press to store. MEM icon
appears and a short tone beep is
heard.
To remove the channel from
Memory, press once more.
The MEM icon disappears.
If SCAN is deactivated while it is tuned to an active channel, the uh089sx will
stay on that active channel.
If none of the channels are active, the uh089sx will reinstate the scan start
channel.
If OS/GS Scanning is initiated when there are no channels programmed in
OS/GS memory, an error tone will be heard and scanning will not start (see
Programming Scan Channels - below).
Programming Scan Channels
9
MENU
ENTER
MON
DCS/CTCSS
MENU
ENTER
MON
DCS/CTCSS