Uniden DS 815 - Manual (Page 14)

10
3. Press -
STORE NAME
is displayed
and a cursor flashes indicating that the
display is ready for the name to be entered.
If this screen appears, the selected memory
location has a number already stored.
4. Use numeric key to enter the name.
The name cannot exceed 12 characters.
Use and to move the cursor
to the next letter - or to create a space.
Use to delete characters as
needed.
5. Press - STORE NUMBER is
displayed.
6. Use the number keypad to enter the phone
number. It cannot exceed 24 digits.
Use to enter a pause. The
screen displays
P .
Each pause counts as one digit and
represents one and half second delay in
time between digits.
Use to delete digits as
needed.
7. Press - the handset beeps and
displays the confirmation screen.
8. Press to return to standby mode
or select another location to programme.
Memory Dialing allows you to dial a number
using just a few key strokes. You can store up
to 29 phone numbers in the memory.
Since each step must be completed within 10
seconds, it may be advisable to review these
instructions before starting.
1. Press and hold until
MEMORY
STORE
is displayed.
2. Press or or enter a two digit
number ( ) to select the
STORING PHONE NUMBERS AND NAMES
memory
EDIT MEMORY 01
DELETE MEMORY 01
GO BACK
STORE NAME
MEMORY STORE
01 EMPTY
02 EMPTY
STORE NUMBER
delete/page
#
select
select
redial/p
delete/page
select
memory
The pause feature is useful
for long distance calling,
credit card dialing, or
sequences that require a
pause between digits.
NOTE
When storing a number,
always include your area
code (eg: 02), so name
tagging will operate (refer
page 15).
NOTE
STORE NUMBER
95979035
MEMORY 01 STORE
MEMORY STORE
01 FRED
02 JOHN SMITH
0 1 2 9