Setting up your answering system, Answering system settings – Uniden EXAI 7248 User Manual

Page 32

[ 3 1 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E

w w w . u n i d e n . c o m

Setting Up Your Answering System

Answering System Settings

To set the following six functions you must enter the menu mode.

"Time"

"Security Code"

"Ring Time"

"Record Time"

"Language"

menu/clock

"Message Alert"

menu/clock

Return to standby

with tone sounds.

• To scroll through the menu options, repeatedly press

the menu/clock key in standby mode. The system
returns to standby after the last menu option. You
hear a confirmation tone to indicate standby mode.

• If any of the following occurs during menu setup, the

system returns to standby; you will have to start over
with the procedure you were performing.
-The talk/flash key is pressed
-The

(play/stop) key is pressed

-10 seconds elapse without a key press
-An incoming call is received

• If the system remains idle for about five seconds after

the announcement, the system returns to standby.
Once the

/volume/select key is pressed, the

idle time is extended to 10 seconds.

•For your convenience,

voice prompts will
guide you through the
menu mode.

•After the setting, press

the

(play/stop)

key to exit the menu
mode, or the menu/
clock key to move to
the next menu option.

note

E IN

W
E

EXAI7248.book 31 ページ２００４年１月１５日　木曜日　午前１１時５６分