Uniden DX15686 Series - Manual (Page 18)

7
2) Press [
] to move the pointer to select AREA CODE.
3) Press
[select/channel]. If an area code was already stored, the phone will display it.
4) Use the number keys (
[0] – [9] ) to enter the three-digit area code.
If you make an error, use
[delete/transfer] to backspace.
5) Press
[select/channel]. A confirmation tone sounds.
6) Press
[end] or return the handset to the charging cradle to complete the setting. The
handset returns to standby.
Choosing.the.Dialing.Mode.(HS1.only)
Your phone can communicate with the telephone network in two different ways: tone dialing and pulse dialing. These
days, most telephone networks use a method called tone dialing, so your phone comes programmed for tone dialing
by default.
If your phone company uses pulse dialing, you'll need to change your phone's dial mode. There's an easy way to tell:
try making a call. If your call connects, your phone's setting is fine. If not, you may need to change the dial mode.
To change the dial mode:
) When the phone is in standby, press and hold
[cid/menu]. The following screen appears.