Uniden DECT1820 User Manual

Page 5

On the DECT1820 handset you want to register:

On your original base:

On the DECT1820 handset:

1. Press

to access the main menu.

2. Press up or down key until

is displayed and

press

Press up or down key to display

and press

.Press up or down key to select your base number and press

Press and hold

for approx. 3 seconds until you hear

the registration tone. You are now in ‘registration mode’.

If the base already has the maximum number of handsets (6)

registered to it you will need to de-register one of the existing

handsets before you can register the new handset.

See section below for de-registering handsets.

Enter the base PIN code. Pre-set base PIN code is 0000. You will

hear a confirmation tone when registration is complete.

When in standby mode, the new handset number will be displayed.

The handset will automatically be allocated with the next available

handset number.

If registration is unsuccessful, the display will show

and you will need to follow the registration

procedure again.

"Add.Settings"

"Register"

Not

Registered

find handset

menu/ok

[4]