Uniden DA071 - Manual (Page 11)

TROUBLE SHOOTING
If your Answer Machine is not performing to your expectations, please try these simple steps
first before calling Uniden customer service.
SUGGESTION
• Make sure the telephone line cord is plugged in.
• Make sure that the AC Adaptor is plugged in.
• Make sure the Answer Machine is turned on.
• The memory may be full. Delete some messages.
• The incoming messages may be too long.
• The memory may be full.
• Delete some or all of the saved messages.
• Adjust the volume control.
Refer page 3.
• The memory may be full. Delete some or all of the
saved messages.
• Make sure you’re using the correct PIN number.
• Remote features cannot be accessed if Answer Machine is
turned off.
PROBLEM
Answering system
does not work
Messages are
incomplete
No sound on the
base unit speaker
Cannot record
outgoing message
(OGM)
Cannot access
remote call-in
features.
SPEAKERPHONE
Making a Call
Press to turn on the speaker phone feature, dial the phone number.
Complete the conversation, press again to turn off the speaker phone feature.
The Green indicator light is on when the speaker phone is in use.
Answering a Call
Press at any time to answer a call.
Redial / Pause Function
The unit automatically stores the last number you dial.
Press to turn on the speaker phone and then press .
The phone automatically dials the last number dialed.
The pause function programs in a 2 second pause between dialling segments.
Setting Speakerphone Volume
Press or to set desired volume.
speaker
speaker
speaker rd/p
volume
If the last number
is over 32 digits, it
will redial previous
32 digits.
If power is
disconnected from
the unit, the last
number dialed will
be lost from the
redial memory.
7
speaker
DA071 V6 Qk 5/17/02 2:39 PM Page 11