U-Line BI-95BTP - Manual

ICE MAKER
Model BI-95BTP
FEATURES BENEFITS
1. High ice production Produces up to 23 lbs. of ice per day and stores 12 lbs.
2. Requires no drain Easy and inexpensive to install. Only needs 1/4 inch outside diameter
water line connection.
3. Front vented for built-in installation No need for extra fans, air space, or special venting to the outside of the
cabin. Do not obstruct front grille.
4. Conserves water Only 2-3/4 gallons of water required to produce approximately 22 lbs. of ice.
5. Conserves energy Uses less electricity than a 75-watt light bulb.
6. Field reversible door with zero clearance Fits any location, easy access.
door swing
7. Adjustable temperature control Permits adjustment of daily ice rate.
8. 1/2 inch wide flange Surrounds front of cabinet for easy mounting in surrounding cabinets.
9. Corrosive resistant components Hinges and fasteners are stainless steel to prevent corrosion.
ADDITIONAL FEATURES:
• Will accept flat or raised panel
• Panel size: H 13-15/32" X W 12-15/16"
• Travel pin keeps door securely closed
• See through, removable ice bucket
• Shipping weight: 65 lbs.
• Available in 110/115V 60 cycle or 220/230V 50/60 cycle
All specifications subject to change without notice.
8900 N. 55th Street
Milwaukee, Wisconsin 53223
(414) 354-0300
FAX (414) 354-7905
www.u-line.com
ICE MAKER
* WATER
LINE
INLET
* POWER
CORD
ADD 1-1/2" TO DEPTH FOR
WATER LINE CONNECTION
17 (43.2)
14-3/8 (36.5)
FLANGE
15-1/16 (38.2)
W/FLANGE
8-1/2
(21.6)
13-13/16 (35.1)
24-3/4
(62.9)
25-1/4
(64.0)
HT/W FLANGE
* ON BACK OF UNIT
INCHES (CENTIMETERS)
KCC Printed in U.S.A. P/N SS-BI-95BTP