Uniden Answering Machine - Manual (Page 25)

MEMORY DIALING
M E M O R Y D I A L I N G [ 25 ] www.uniden.com
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses.
Your cordless telephone stores up to 20 names/numbers in each handset.
1) Press the mem key in standby mode. “ Select Memory ” is
displayed.
2) Press the vol/ring/ or vol/ring/ key, or enter a number
(01 - 20) to select the memory location where you would
like to store the number.
3) Press the mem or select/channel key.
4) Press the mem or select/channel key. The following screen
appears and a cursor flashes indicating that the display is ready
for the name to be entered.
If the Edit screen appears, the selected memory location is
already stored. Then you must either edit the entry in
this location, delete the entry in this location, or select
“
Go Back ” to choose another location.
5) To enter a name (up to 13 characters), use the number keys.
• See the "Steps for Entering Names and Special Characters". (See page 27.)
• Use the #/
and * /tone/ key to move the cursor to the desired location.
• Use the delete/transfer key to delete characters as needed.
• Press and hold the delete/transfer key to delete all the characters.
• If a name is not required, go to step 6.
Select Memory
01
02 JOHN DOE
Store Name
Edit Memory01
Delete Memory01
Go Back
• In memory dialing
operation, you must
press a key within 30
seconds or the phone
will return to the
standby mode. If you
return the handset to
the base, the phone
will return to the
standby mode also.
• You have 30 seconds
after pressing the
mem or
select/channel key to
enter the number you
wish to store.
Otherwise, an error
tone will sound and
the phone will return
to standby mode.
01:(Empty)
Press Select
to edit